2

8 Foot x 10 Foot Chain Wire Temporary Fence Panels

DB Fencing can supply you a quick and convenient solution for your temporary chain link fence needs in event or job site. Our high quality Chain Link Fence Panels are free-standing, so no drilling post hole is required , which can be portable and used many times. Temporary Fence Panels are supported by panel stands or (feet).

Known for their quality and durability, our Temporary Fence Panels have become the first choice of many contractors, construction companies and special event organizers.

1. Temporary Chain Link Fence Panels Specs

• Panel Size: 6ft x 12ft, 6ft x 10ft, 6ft x 8ft, 8ft x10ft, 8ft x 12ft

• Frame: 1.25"/32 mm, 1.5"/38 mm, 1.6"/40 mm round optional

• Chain Link Mesh Wire: 9 ga/2.9mm, 10.5 ga/2.7mm, 11 ga/2.3mm, 11.5 ga/2.2mm, 12 ga/2.0mm optional

• Chain Link Mesh Size: 2" (50 × 50 mm), 2.25" (57 × 57 mm), 2.4" (60 × 60 mm), 2.75" (70 × 70 mm) optional

• Cross Brace: Vertical, horizontal brace with 1"/1.25’’ round or the same with frame O.D

• Treatment: Pre-Galvanized pipe and panel welded,then galvanized spraying or hot dipped galvanized

• Standard 1: AS 1725-2010 Chain Link Fabric Security Fences and Gates

• Standard 2: AS 2423-2002 – Coated Steel Wire Fencing Products for Terrestrial,Aquatic and General Use

• Standard 3: AS 54687-2007 –  Temporary Fencing and Hoarding
  

2.  Cross Brace: 1" or 1.25” O.D,14 Gauge wall thick

• Plus Bracing – Both vertical and horizontal bracing to impact strength from outside and wind to be a durable panels 

• Vertical Bracing – The vertical brace (centered in frame horizontally) increasin the strength and durability of the fence panel

3. The stands of temporary chain link fence size 16" x 36", with 1-3/8" diameter tubing and slightly smaller uprights for panels to fit over.

4. Temporary chain link fence clamps

Pressed steel, 8 Gauge, Designed to join fence panels together, Hot-dipped galvanized silver color,

Included 3/8" x 2-1/2" H.D.G. carriage bolt & nut; priced per Set.

5. Barb Wire, Razor Wire -Stop attempting to gain illegal access to your site

The barb wire and razor wire can be along the top of our 6ft and 8ft height temporary chain link fences and matching gates.

Each wire type will discourage fence climbers. We advise customers check with local laws to learn if barb/razor is permitted or violates a city ordinance.

Normally three strands barbed wire from post to post in a straight line, or arranging the barb arms at a 45 degree angle. The latter method is very rare because the barb sticks out into a walking path.

6. Privacy Fence Screens, Windscreens

The privacy fence screens / windscreens is fit to 6ft or 8ft height chain link fences, which is  polyethylene mesh to provide 88% privacy and 12% airflow.

Highly effective to dampen wind, resist water, mold and mildew, provide privacy and cut UV rays.

Very popular for temporary commercial use at construction sites, agricultural fields, emergency restoration areas or shelters, sports fields, courtyards, nurseries or gardens.

7. Temporary chain link fence gate

• Personal Gate: The gate of Temp Fence chain link fence is available with 3′ wide opening Pedestrian
  gate with hinges and pad-lockable latch, giving a path to safely and efficiently allow the crows.
  

  
  

• Swing gates: The swing gate fully open to allow trucks to pass through. If the opening is 12 feet or less (such as a pedestrian entrance), a single swing gate is sufficient. Swing gates usually open inward (toward the property), unless impossible to do otherwise. For wider openings (vehicle entrances), double swing gates are recommended as this configuration requires less room to operate than a single, longer gate.

• Slide gates: Allows sufficient room for traffic of all kinds to pass through. Slide Gates require very little room to operate and are a preferred option when a construction area has limited space, such as near a roadway, property line or permanent structure. The area around a slide gate must be level to allow each gate to move freely and parallel to the attached chain link fence for proper operation

.

 8. Temporary chain link fence packing and loading

  

9. Temporary chain link fence features

• 360° full welded tubular frame
• Galvanized 60 or 28 microns to anti- corrosion 
• Installs on any surface including ground, asphalt or concrete
• ASTM A392-06 standard minimize the amount of corrosion 
• The welding corner joints are galvanized sprayed painting to cover any exposed metal.

• Galvanized saddle clamps, nuts, bolts used to attach panels together. 
•  

Temporary Fence For Dogs Home Depo, Driveway  

.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

Temporary Fence For Sale

DB Fencing specializes in manufacturing temporary fencing solutions for a range of sites. Temporary fencing around a construction site can provide the site safety from the trespassers  and reduce injuries. In Australia and New Zealand, it is a mandatory requirement for the temporary fence construction site. Usually we use 2.1m height and 2.4m length panel, concrete filled base to fix the two panels, and steel clamps to connect two temp fence panel. It’s very sturdy and secured. Also, the barbed wire, bracing, shade cloth and temp fence gate can be your separate choices.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

Temporary Construction Fence Panels Rental Hire Company Near Me  

.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

AS4687-2007 Standard Temporary Fencing On Construction Site 

We are so proud of being a brand temporary fence suppliers for so many big Construction and fence company with competitive prices and reliable fence in Australia and New Zealand since 2009.

All of our temporary fencing is made up of galvanised ‘anti climb’ weld mesh panels, color concrete filled bases and clamps.

Being in near new condition, our temporary fencing will provide a professional, tidy and safe appearance to your work site.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

Temporary Construction Fence with Gate in Vicrotia  

.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

Economy, Standard And Heavy Duty Temporary Fence 

We are so proud of being a brand temporary fence suppliers for so many big Construction and fence company with competitive prices and reliable fence in Australia and New Zealand since 2009.

In our factory, there are 10 welding platform, which can supply large production. And 1 plastic feet machine, so many suppliers in Anping, China buy it from us. So keep costs low, ensure quality and standards are met, and sell high quality temp fence products at very competitive prices. We are so proud of our products, especially the plastic base we produce by ourselves, UV factor is so important for the feet to avoid the fade color in short times, we can guarantee 3-5 years no color fading when add BASF UV Material.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

2100 x 3500mm Temporary Fence Hire Queensland, Perth In Australia

.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 3.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

Temporary Construction Fence Solution 

DB Fencing specializes in manufacturing temporary fencing solutions for a range of sites. Temporary fencing around a construction site can provide the site safety from the trespassers  and reduce injuries. In Australia and New Zealand, it is a mandatory requirement for the temporary fence construction site. Usually we use 2.1m height and 2.4m length panel, concrete filled base to fix the two panels, and steel clamps to connect two temp fence panel. It’s very sturdy and secured. Also, the barbed wire, bracing, shade cloth and temp fence gate can be your separate choices.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail

AS4687-2007 Standard Temporary Fence 2100m x 2400mm high galvanised with 60x150x4mm infilled mesh with orange HDPE Base

.

1. Temporary Fence Panel Specs

We provide economy, standard and heavy duty fence options. As the processing of temp fence panel, there are two ways. one is pre-galvanized wire and frame pipe welded together strongly on the front and back sides, then sprayed painting zinc silver color.  The another way is black material raw wire and black pipe welded together for both front and behind sides, then hot dipped galvanized for the whole temp fence panel, which plates amount is more than 42 Microns ( AS4687-2007 Standard).
Also some other special customers asks the middle vertical brace to reinforce the wire mesh panel and frame pipe to anti crush and wind.

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 40NB (48mm OD pipe x 2.0mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 2.0mm wall thick) Panel 3.5m long x 2.0m high galvanised with 60x150x4mm infilled mesh

• 25NB (32mm OD pipe x 1.35mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

• 25NB (32mm OD pipe x 1.2mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3.5mm infilled mesh

• 25NB (32mm OD pipe x 1.5mm wall thick) Panel 2.4m long x 2.1m high galvanised with 60x150x3mm infilled mesh

At first stage before 2013, most of Australian wholesalers sell hot dipped galvanized temporary fence to the local customers, and repair some bad rusting panels by painting. Then one of them find this conditiones, choose the pre-galvanized way and painting the whole panel, which seems the same quality as hot dipped galvanzied one, but installed some monthes later, all panels welding point beaigns to get rust.
Above all, we suugest the strong and last-long temporary fence panels, maybe it higher prices, but reasonable and values its good quality.

2. Temporary Fence Quality Testing

1. Temporary Fence Galvanized. 59.8 Um	2. Temporary Fence Wire Dia.4.0mm	3. Temporary Fence Mesh 150mm
4. Temporary Fence Welding Process	5. Hot Dipped Galvanized Temp Fence Panel	6. Full Welding Point
7. Orange Temp Fence Panel Flatten Pipe	8. Powder Coated Orange Fence Panel	9. Green Temp Fence Powder Coated

3. Temporary Fence Plastic Base

Temporary fencing is commonly equipped with plastic bases/feet. Our temporary fencing feet comes with a 5 year UV and anti-aging guarantee to accommodate to the Australian climate. The qualified plastic coating contribute to fade-proof performance to maximize health and eliminate safety risks.

• Temp fence feet – High quality anti-uv formula, UV absorbent 2002, UV uv-p, UV absorbent uv-531 as well BHT2, 6-di-buty1-4-methylphenol yellow UV;

• Temporary fence feet material: Adopt bright and pure master color granules, high-density polyethylene No. 5502. The temp fence feet has good mechanical properties, the tensile strength is more than 50mpa, the tensile strength is 500KG/cm. Impact resistance more than 50J/m, bending elasticity of 24000KG/cm, load winding temperature more than 100℃, hardness, excellent aging.

• Temporary fence Base weight can be customized according to customer requirements for weight 0.9,1.0,1.1,1.5KG to 1.2KG and a variety of 1.5KG weight.

• Temporary fence feet dimensions are generally 600mmX230mmX150mm– diameter -mm mounting 32/38/40/42/48/50mm long tubes (various diameter details).

Temporary Fence Base Types

1. Temporary Fence Feet Filled With Water	2. Temporary Swimming Pool Fence Base	3. Temporary Fence Injection Mould Base
4. Temporary Fence Blocks Filled With ConcreteTypes 1	5. Temporary Fence Blocks Filled With ConcreteTypes 2	6. Temporary Fence Blocks RAL Standard Color Choices

4.  Temporary Fence Steel Clamps

Our temporary fence clamps are manufactured from high quality steel plates into qualified clamps, which are meeting Australian standard A.S. 4687-2007 for Temporary Fencing & Hoardings.

• Hot dipped galvanized for min 42 microns zinc coating.
• Sturdy to withstand the harshest environments.
• Suit 32 mm, 40 mm or other specs steel pipes and bases.

 

5.  Other Accessories of Temporary Fence System

• Bracing

• Shade Cloth

• Fence Gate

• Handrail