9

Removable/locking feet design makes crowd control easy to stack and store

Crowd Control Barrier is built from high-quality carbon steel and is hot-dipped galvanized
inside and out to prevent rust and corrosion and ensure long term weather resistance.

1. Detailed description of crowd control barriers

2. Base type of crowd control barriers

Crowd control barrier with V type foot

Crowd control barrier with flat type foot

Crowd control barrier with bridge type foot

Swinging or Sliding Gates and Barricade Arches

Use gates intermittently among long-running lines of barriers to allow controlled access through
the line. This will enable officials, police, and EMS personnel to open a gate when necessary for
official/emergency purposes.

For crowd traffic flow, a gate can also act as a “floodgate” to relieve heavy congestion. Gates provide
you with a necessary “emergency back door” in case of unforeseen circumstances:

Allow for controlled breaks in long lines of interlocking steel barricades

Permits the police or EMS personnel the ability to break through crowd control barriers in emergency situations

All the weight is on the wheels (not on the hinged side)

Heavy-duty steel latch locks gate into the next steel barrier for a continual run of connecting frames

3 standard international lengths in stock to match 3 basic hook variations.

3. Finish of crowd control barriers

The whole panel is hot dipped galvanized after welding as per the specs and drawing. 

The barrier is polished after galvanizing so that no burrs sharp points to hurt the workers.

4. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers more
beautiful and anticorrosive

It is not only light but also hard and very easy to handle and transport

Movable feet are more convenient and efficient for transportation and storage

Hot dip galvanized to protect steel

5. Applicationof crowd control barriers

Construction site  Demolition site·Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

6. Packaging of crowd control barriers

1.In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

7. Features of crowd control barriers

Excellent weight to length ratio

Easily installed by one person

Colorful for Outdoors

Flexible Feet Choice

Pedestrian & Vehicle Gate

Customization Service

Flexible Structure

Extra long hooks for uneven ground

Hot dipped galvanized

Removable feet

The United States crowd control barrier can prevent tripping and stamping accidents

The Crowd Control Barrier is also called steel barricades, which is made of galvanized steel,
with size 2.0 x 1.1m, 2.2×1.1m, 2.3 x 1.1m, 2.5 x 1.1m,2.6 x 1.1m. The barricades are linked
together to provide a solid barrier to direct pedestrian traffic. It is easily and quickly installed
between pedestrian traffic and possible danger to provide safety, especially Children.

1. Detailed description of crowd control barriers

Other Size: Crowd Control Barriers

1) 6.79′ x 2.72′ Suits Frame with flexible supporting leg

2) 6.82′ x 3.18′ Suits Frame with fixed supporting leg

6.82′ x 3.44′ Suits Frame with Plate base

102"L x 40"H overall size

2. Crowd Control Barrier Base Options

Feet: Two (2) bolt on flat feet ½” x 2″ flat steel bar with 1¼” O.D. 14 galvanized stem, or 

Two (2) bolt on bridge feet 1½” O.D. galvanized steel, 16 gauge, with ¼” O.D. galvanized stem.

There are several barrier base options available with the bridge base and flat base being the
most popular by far.

3. A MORE SECURE CROWD CONTROL SYSTEM

Interlocking steel barriers are designed to create a line of barriers, locking them together, so they
cannot be easily broken down out of order.  The Male hook of the barrier locks into place once
inserted into the female hook.

Blockader Steel Barrier Advantages
Locking: Male-Female interLocking ends. Units join and unlock at one position (30 degrees). Male
interlocking device is a minimum ⅝” diameter rod welded through main frame at both ends. Male/Female
connections have enough clearance to allow for uneven ground, a minimum of ½” on top and bottom when
connected.HOT-DIP GALVANIZINGThe best protection for steel, resulting in a longer lifespan for your barriers.
Barriers that are merely painted will rust.

4. Finish of crowd control barriers

The whole panel is hot dipped galvanized after welding as per the specs and drawing. 

The barrier is polished after galvanizing so that no burrs sharp points to hurt the workers.

5. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive

It is not only light but also hard and very easy to handle and transport

Movable feet are more convenient and efficient for transportation and storage

Hot dip galvanized to protect steel

6. Application of crowd control barriers

Construction site  Demolition sitePublic traffic scenic area Bike rack barricades

Sport fields Concert  Demonstration

7. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4.Custom packing is also available

8. Features  of crowd control barriers

Excellent weight to length ratio

Easily installed by one person

Colorful for Outdoors

Flexible Feet Choice

Pedestrian & Vehicle Gate

Customization Service

Flexible Structure

Extra long hooks for uneven ground

Hot dipped galvanized

Removable feet

 

Crowd control barrier insert columns before welding to obtain a durable construction

Steel Crowd Control Barricades are made of heavy duty Hot Dip galvanized steel. We offer the
highest-quality, most durable, and warranty protected products at unbeatable savings to you! These
are portable, durable crowd control systems that work great as temporary, easy to install crowd control
solutions for protecting pedestrians and guiding drivers through crowded areas. They are quick and easy
set-up but still durable and providing high visibility boundaries. 

1. Detailed description of crowd control barriers

2. Feet ofcrowd control barriers

A> Flat Feet (Detached or Settled)

 

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

D>  Wheel  Feet  ( Settled)

Crowd Control Barrier Laser-cut Signs – The most effective inventory control and identification
tool. Laser-cut signs are permanent and welded to the uprights prior to galvanization. They
cannot be removed without cutting out two uprights.
Reflective Sheeting – commonly used on traffic cones – is also an effective way to identify
steel barricades.Barricade Covers – your crowd control system is typically used around crowds
of people. Barricade covers allow you to promote branding or help direct pedestrians to where they need to be.

3. Steel Crowd Control Barriers

The Standard in Quality for Crowd Control Barricades Block unauthorized access and maintain
crowd control Interlocking steel barriers are used for crowd control and crowd management in
situations ranging from major public events to small parades and festivals. Barriers can designate
line space and block off restricted areas at any site. Crowd control barricades are available in three
standard lengths – 1-meter, 2-meter, and 2.5-meter. Barriers feature bolt-on, replaceable bases.
Barriers are hot dip galvanized to ensure that they remain rust- and corrosion-free, even in outdoor
applications.

4. Standard Economy Crowd Control Steel Barriers – 6.5 ft. Long

This lighter weight barrier is an economical option for customers looking for barriers
primarily for line delineation, as opposed to heavy duty crowd control.

·Lighter weight, with same quality features as the Classic heavy duty barrier

·Center steel panel carrying handle for easy portability

·Standard barriers will interlock with Classic heavy duty barriers

The Standard Barrier incorporates all the quality features of heavy-duty barricades into a
lighter-weight portable barrier which is economically priced.

5. Advantages of crowd control barriers

 Hot dip galvanizing technology is used after welding to make thecrowd control barriers more
beautiful and anticorrosive

It is not only light but also hard and very easy to handle and transport

Movable feet are more convenient and efficient for transportation and storage

Hot dip galvanized to protect steel

6. Finish of crowd control barriers

The whole panel is hot dipped galvanized after welding as per the specs and drawing. 

The barrier is polished after galvanizing so that no burrs sharp points to hurt the workers.

Applicationof crowd control barriers

Construction site  Demolition site·Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

7. Packagingof crowd control barriers

1.in bulk, with containrs

2.or plastic inside, metal pallet outside

3.standard export packaging

4.custom packing is also available

8. Features of crowd control barriers

Excellent weight to length ratio

Easily installed by one person

Colorful for Outdoors

Flexible Feet Choice

Pedestrian & Vehicle Gate

Customization Service

Flexible Structure

Extra long hooks for uneven ground

Hot dipped galvanized

Removable feet

360°full hand welding 90（in） x 43（in）crowd control barrier use for Canada Traffic Control

Steel Crowd Control Barricades are made of heavy duty Hot Dip galvanized steel. We offer the
highest-quality, most durable, and warranty protected products at unbeatable savings to you! These
are portable, durable crowd control systems that work great as temporary, easy to install crowd control
solutions for protecting pedestrians and guiding drivers through crowded areas. They are quick and easy
set-up but still durable and providing high visibility boundaries. 

1. Detailed description of crowd control barriers

2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

 

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

D>  Wheel  Feet  ( Settled)

Crowd Control Barrier Laser-cut Signs – The most effective inventory control and identification
tool. Laser-cut signs are permanent and welded to the uprights prior to galvanization. They
cannot be removed without cutting out two uprights.
Reflective Sheeting – commonly used on traffic cones – is also an effective way to identify
steel barricades.Barricade Covers – your crowd control system is typically used around crowds
of people. Barricade covers allow you to promote branding or help direct pedestrians to where they need to be.

3. Steel Crowd Control Barriers

The Standard in Quality for Crowd Control Barricades Block unauthorized access and maintain
crowd control Interlocking steel barriers are used for crowd control and crowd management in
situations ranging from major public events to small parades and festivals. Barriers can designate
line space and block off restricted areas at any site. Crowd control barricades are available in three
standard lengths – 1-meter, 2-meter, and 2.5-meter. Barriers feature bolt-on, replaceable bases.
Barriers are hot dip galvanized to ensure that they remain rust- and corrosion-free, even in outdoor
applications.

4. Standard Economy Crowd Control Steel Barriers – 6.5 ft. Long

This lighter weight barrier is an economical option for customers looking for barriers
primarily for line delineation, as opposed to heavy duty crowd control.

·Lighter weight, with same quality features as the Classic heavy duty barrier

·Center steel panel carrying handle for easy portability

·Standard barriers will interlock with Classic heavy duty barriers

The Standard Barrier incorporates all the quality features of heavy-duty barricades into a
lighter-weight portable barrier which is economically priced.

5. Advantages of crowd control barriers

 Hot dip galvanizing technology is used after welding to make thecrowd control barriers more
beautiful and anticorrosive

It is not only light but also hard and very easy to handle and transport

Movable feet are more convenient and efficient for transportation and storage

Hot dip galvanized to protect steel

6. Finish of crowd control barriers

The whole panel is hot dipped galvanized after welding as per the specs and drawing. 

The barrier is polished after galvanizing so that no burrs sharp points to hurt the workers.

Applicationof crowd control barriers

Construction site  Demolition site·Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

7. Packaging of crowd control barriers

1.In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

8. Features of crowd control barriers

Excellent weight to length ratio

Easily installed by one person

Colorful for Outdoors

Flexible Feet Choice

Pedestrian & Vehicle Gate

Customization Service

Flexible Structure

Extra long hooks for uneven ground

Hot dipped galvanized

Removable feet

Easy installation 98（in） x 43（in）crowd barriers supply to Canada Demolition site

The Crowd control barrier is a sturdy fence system, which can quickly control a crowd
while vehicle and pedestrian traffic to block off restricted areas . This kind of steel barricade
is made of high-quality carbon steel with hot dipped galvanized to resist weather for long, used
in civil projects, work sites, events and festivals.

1. Detailed description of Crowd Control Barriers

 2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

 

D>  Wheel  Feet  ( Settled)

3. Barricades of crowd control barriers

Interlock using an industry-standard hook and half-loop fastening system.
Main Frame: Outside perimeter (main frame) is made of 1½ ” O.D. galvanized steel tubing,
minimum 16 gauge. The outer frame is a single length of tubing without welds or deformation.
Pipe is bent at right angleswith a minimum of smooth deformation. Horizontal and vertical bars
are at right angles to overall frame.

4. Grill of crowd control barriers

21 equally-spaced bars inside vertical members, made of ½” O.D. steel tubing, minimum
16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 21 interior
bars are 4¼”apart, O.D. to O.D. The spacing between inside vertical members does not exceed
4½” and meets all standard codes.

 

5. Finish of crowd control barriers

Entire panel is hot-dip zinc-galvanized after welding conforming to Marine specifications.
Every barrier is filed after galvanizing so that burrs from galvanizing are filed smooth and
there are no sharp points.

6. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive
It is not only light but also hard and very easy to handle and transport
Movable feet are more convenient and efficient for transportation and storage
Hot dip galvanized to protect steel

7. Application of crowd control barriers

Construction site  Demolition site Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

8. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

 

Flexible structure 3.2*1.1m crowd control barrier use to Australia  Public traffic

The Crowd control barrier is a sturdy fence system, which can quickly control a crowd
while vehicle and pedestrian traffic to block off restricted areas . This kind of steel barricade
is made of high-quality carbon steel with hot dipped galvanized to resist weather for long, used
in civil projects, work sites, events and festivals.

1. Detailed description of Crowd Control Barriers

 2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

 

D>  Wheel  Feet  ( Settled)

3. Barricades of crowd control barriers

Interlock using an industry-standard hook and half-loop fastening system.
Main Frame: Outside perimeter (main frame) is made of 1½ ” O.D. galvanized steel tubing,
minimum 16 gauge. The outer frame is a single length of tubing without welds or deformation.
Pipe is bent at right angleswith a minimum of smooth deformation. Horizontal and vertical bars
are at right angles to overall frame.

4. Grill of crowd control barriers

21 equally-spaced bars inside vertical members, made of ½” O.D. steel tubing, minimum
16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 21 interior
bars are 4¼”apart, O.D. to O.D. The spacing between inside vertical members does not exceed
4½” and meets all standard codes.

 

5. Finish of crowd control barriers

Entire panel is hot-dip zinc-galvanized after welding conforming to Marine specifications.
Every barrier is filed after galvanizing so that burrs from galvanizing are filed smooth and
there are no sharp points.

6. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive
It is not only light but also hard and very easy to handle and transport
Movable feet are more convenient and efficient for transportation and storage
Hot dip galvanized to protect steel

7. Application of crowd control barriers

Construction site  Demolition site Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

8. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

 

Suppliers  Australia 2*1.1m crowd control barrier can accommodate for harshest environments

The Crowd control barrier is a sturdy fence system, which can quickly control a crowd
while vehicle and pedestrian traffic to block off restricted areas . This kind of steel barricade
is made of high-quality carbon steel with hot dipped galvanized to resist weather for long, used
in civil projects, work sites, events and festivals.

1. Detailed description of Crowd Control Barriers

 2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

 

D>  Wheel  Feet  ( Settled)

3. Barricades of crowd control barriers

Interlock using an industry-standard hook and half-loop fastening system.
Main Frame: Outside perimeter (main frame) is made of 1½ ” O.D. galvanized steel tubing,
minimum 16 gauge. The outer frame is a single length of tubing without welds or deformation.
Pipe is bent at right angleswith a minimum of smooth deformation. Horizontal and vertical bars
are at right angles to overall frame.

4. Grill of crowd control barriers

21 equally-spaced bars inside vertical members, made of ½” O.D. steel tubing, minimum
16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 21 interior
bars are 4¼”apart, O.D. to O.D. The spacing between inside vertical members does not exceed
4½” and meets all standard codes.

 

5. Finish of crowd control barriers

Entire panel is hot-dip zinc-galvanized after welding conforming to Marine specifications.
Every barrier is filed after galvanizing so that burrs from galvanizing are filed smooth and
there are no sharp points.

6. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive
It is not only light but also hard and very easy to handle and transport
Movable feet are more convenient and efficient for transportation and storage
Hot dip galvanized to protect steel

7. Application of crowd control barriers

Construction site  Demolition site Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

8. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

 

New Zealand 2.5*1.1mcrowd control barrier Ideal for directing pedestrian traffic

The Crowd control barrier is a sturdy fence system, which can quickly control a crowd
while vehicle and pedestrian traffic to block off restricted areas . This kind of steel barricade
is made of high-quality carbon steel with hot dipped galvanized to resist weather for long, used
in civil projects, work sites, events and festivals.

1. Detailed description of Crowd Control Barriers

 2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

 

D>  Wheel  Feet  ( Settled)

3. Barricades of crowd control barriers

Interlock using an industry-standard hook and half-loop fastening system.
Main Frame: Outside perimeter (main frame) is made of 1½ ” O.D. galvanized steel tubing,
minimum 16 gauge. The outer frame is a single length of tubing without welds or deformation.
Pipe is bent at right angleswith a minimum of smooth deformation. Horizontal and vertical bars
are at right angles to overall frame.

4. Grill of crowd control barriers

21 equally-spaced bars inside vertical members, made of ½” O.D. steel tubing, minimum
16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 21 interior
bars are 4¼”apart, O.D. to O.D. The spacing between inside vertical members does not exceed
4½” and meets all standard codes.

 

5. Finish of crowd control barriers

Entire panel is hot-dip zinc-galvanized after welding conforming to Marine specifications.
Every barrier is filed after galvanizing so that burrs from galvanizing are filed smooth and
there are no sharp points.

6. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive
It is not only light but also hard and very easy to handle and transport
Movable feet are more convenient and efficient for transportation and storage
Hot dip galvanized to protect steel

7. Application of crowd control barriers

Construction site  Demolition site Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

8. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

 

2.2*1.1m crowd control barrier can retain its shape and strength for many years

The Crowd control barrier is a sturdy fence system, which can quickly control a crowd
while vehicle and pedestrian traffic to block off restricted areas . This kind of steel barricade
is made of high-quality carbon steel with hot dipped galvanized to resist weather for long, used
in civil projects, work sites, events and festivals.

1. Detailed description of Crowd Control Barriers

 2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

 

D>  Wheel  Feet  ( Settled)

3. Barricades of crowd control barriers

Interlock using an industry-standard hook and half-loop fastening system.
Main Frame: Outside perimeter (main frame) is made of 1½ ” O.D. galvanized steel tubing,
minimum 16 gauge. The outer frame is a single length of tubing without welds or deformation.
Pipe is bent at right angleswith a minimum of smooth deformation. Horizontal and vertical bars
are at right angles to overall frame.

4. Grill of crowd control barriers

21 equally-spaced bars inside vertical members, made of ½” O.D. steel tubing, minimum
16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 21 interior
bars are 4¼”apart, O.D. to O.D. The spacing between inside vertical members does not exceed
4½” and meets all standard codes.

 

5. Finish of crowd control barriers

Entire panel is hot-dip zinc-galvanized after welding conforming to Marine specifications.
Every barrier is filed after galvanizing so that burrs from galvanizing are filed smooth and
there are no sharp points.

6. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive
It is not only light but also hard and very easy to handle and transport
Movable feet are more convenient and efficient for transportation and storage
Hot dip galvanized to protect steel

7. Application of crowd control barriers

Construction site  Demolition site Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

8. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available

 

2.6*1.1m Crowd control barrier acts as safety barrier for people protection

The Crowd control barrier is a sturdy fence system, which can quickly control a crowd
while vehicle and pedestrian traffic to block off restricted areas . This kind of steel barricade
is made of high-quality carbon steel with hot dipped galvanized to resist weather for long, used
in civil projects, work sites, events and festivals.

1. Detailed description of Crowd Control Barriers

 2. Feet of crowd control barriers

A> Flat Feet (Detached or Settled)

B> Bridger Feet (Detached or Settled)

C>  "^"Type Feet ( Settled)

 

D>  Wheel  Feet  ( Settled)

3. Barricades of crowd control barriers

Interlock using an industry-standard hook and half-loop fastening system.
Main Frame: Outside perimeter (main frame) is made of 1½ ” O.D. galvanized steel tubing,
minimum 16 gauge. The outer frame is a single length of tubing without welds or deformation.
Pipe is bent at right angleswith a minimum of smooth deformation. Horizontal and vertical bars
are at right angles to overall frame.

4. Grill of crowd control barriers

21 equally-spaced bars inside vertical members, made of ½” O.D. steel tubing, minimum
16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 21 interior
bars are 4¼”apart, O.D. to O.D. The spacing between inside vertical members does not exceed
4½” and meets all standard codes.

 

5. Finish of crowd control barriers

Entire panel is hot-dip zinc-galvanized after welding conforming to Marine specifications.
Every barrier is filed after galvanizing so that burrs from galvanizing are filed smooth and
there are no sharp points.

6. Advantages of crowd control barriers

Hot dip galvanizing technology is used after welding to make thecrowd control barriers
more beautiful and anticorrosive
It is not only light but also hard and very easy to handle and transport
Movable feet are more convenient and efficient for transportation and storage
Hot dip galvanized to protect steel

7. Application of crowd control barriers

Construction site  Demolition site Public traffic  scenic area Bike rack barricades

Sport fields Concert  Demonstration

8. Packaging of crowd control barriers

1. In bulk, with containrs

2. Plastic inside, metal pallet outside

3. Standard export packaging

4. Custom packing is also available